DAT done 9/2

This forum made possible through the generous support of SDN members, donors, and sponsors. Thank you.

benneb23

Full Member
10+ Year Member
Joined
Mar 2, 2011
Messages
17
Reaction score
0
PA/QR/RC/BS/GC/OC/TS/AA
21/21/25/24/24/25/24/24

Non science major 3.9 GPA 3.75sGPA top public.

PAT: Heads up for those using crack dat pat. Keyholes on the test are much harder. There is more emphasis on size rather than just shape. Also, some look like they are hand drawn (both keyhole and key) which was a surprise, not all are sharp and neat like in CDP. There were also some tough folds (unsymmetrical shapes). I was averaging 24's on my CDP's. Also, find your angle method because they DO work. Mine was skateboard ramp for acute angles and large obtuse angles and "how comfortable it would be to sit on" for angles close to 90 degrees.


QR: Best advice: if you don't know it...mark it and skip it. Time conservation is key. Also, know your trig!

RC: how the hell? I thought this was going to be my worst section. I was actually worried that I might not break 17. Practicing Topscore passages will make you want to use S&D and practicing Achiever will make you want to read carefully first. I consider myself a terrible reader so this was a pleasant surprise. I used the Kaplan method which is basically fast read then S&D. Took me about 8 minutes to read and 12 minutes answering questions for each article.

More advice...I live about 20 minutes away from my test site but still got a hotel room across the street from my test site the night before. Smartest decision I have ever made. Don't stress yourself by sitting in traffic the morning of.

My averages for Topscore were 19-20. Achiever 16-18. I would advise to do topscore last because achiever will KILL your confidence.

Good luck everybody!!! 🙂
 
Last edited:
DAT 9/2/11 as well!! Didn't do as well as you did (WOW! Congrats) but heres my break down and advice for anyone else taking it. BTW this is my second time around and I definitely have some tips on how to push past to improve. I'll post them if anyone is interested let me know!
9/2 DAT
PA: 24 - QR: 22 - RC: 22 - BS: 18 - GC: 22 - OC: 24 TS: 21 AA: 22
02/04/11 DAT
PA: 19 QR: 18 RC: 18 BS: 18 GC:22 OC: 20 TS:19 AA:19
 
Post your TopScore results. I got 20AA my first time too 🙂

I did my topscore, a few achievers, then a repeat of topscore.

I erased my scores but my ranges for the individual sections were 18-21. However, my second time around I got 26-30 AA on all three test which is due partly to memorization and me focusing on my weak points. Always, write down what you missed and work on that area. That was my main study strategy. Ex. If I missed a solubility problem, I would do the solubility chapter in my Princeton AP chem book and all the problems that follow. I would also look up practice problems online. If I missed it again on a following test....REPEAT! 🙂
 
DAT 9/2/11 as well!! Didn't do as well as you did (WOW! Congrats) but heres my break down and advice for anyone else taking it. BTW this is my second time around and I definitely have some tips on how to push past to improve. I'll post them if anyone is interested let me know!
9/2 DAT
PA: 24 - QR: 22 - RC: 22 - BS: 18 - GC: 22 - OC: 24 TS: 21 AA: 22
02/04/11 DAT
PA: 19 QR: 18 RC: 18 BS: 18 GC:22 OC: 20 TS:19 AA:19

Congrats on your big improvement! Especially on the PAT!!
 
I'd love to hear some tips!

DAT 9/2/11 as well!! Didn't do as well as you did (WOW! Congrats) but heres my break down and advice for anyone else taking it. BTW this is my second time around and I definitely have some tips on how to push past to improve. I'll post them if anyone is interested let me know!
9/2 DAT
PA: 24 - QR: 22 - RC: 22 - BS: 18 - GC: 22 - OC: 24 TS: 21 AA: 22
02/04/11 DAT
PA: 19 QR: 18 RC: 18 BS: 18 GC:22 OC: 20 TS:19 AA:19
 
RC: how the hell? I thought this was going to be my worst section. I was actually worried that I might not break 17. Practicing Topscore passages will make you want to use S&D and practicing Achiever will make you want to read carefully first. I consider myself a terrible reader so this was a pleasant surprise. I used the Kaplan method which is basically fast read then S&D. Took me about 8 minutes to read and 12 minutes answering questions for each article.

:laugh: My thoughts exactly when I got my RC score. Topscore is so much harder it's ridiculous.
 
I did my topscore, a few achievers, then a repeat of topscore.

I erased my scores but my ranges for the individual sections were 18-21. However, my second time around I got 26-30 AA on all three test which is due partly to memorization and me focusing on my weak points. Always, write down what you missed and work on that area. That was my main study strategy. Ex. If I missed a solubility problem, I would do the solubility chapter in my Princeton AP chem book and all the problems that follow. I would also look up practice problems online. If I missed it again on a following test....REPEAT! 🙂

You got 26AA-30AA on TopScore?!?
 
Top