-
CycleTrack and SDN are teaming up to make medical school admissions more transparent and accessible! Read the announcement to learn how we’re supporting the future of CycleTrack’s free application-tracking tools .
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
QR) what are the conversion i must know?
Started by kies89
Get help with your application
Use all the free resources available to you from SDN: articles, guides, expert advising, forums discussions, and school research.
I encountered number of problems converting from miles to feet or vice versa
Did they not provide the conversion for that? Which type of conversions do they usually provide?
They didn't provide conversion, and they usually don't provide conversions in that type of questions do they? 1 mile is 5280 feet, approximately 5000 feet. but 1 mile is 1760 yard, so if you know conversion from yard to feet (3 ft = 1 yard) then you shouldn't have a problem
I would keep temperature conversions fresh. Going between degrees C and degrees K isn't hard because they are proportional, but I would definitely know degrees F to degrees C and vise versa. I haven't taken the DAT so I can't speak from experience, for those who have taken the test.. Are temp conversions worth knowing?
3 feet = 1 yard
1 inch = 2.54 cm
5280 ft in 1 mile.
1760 yards = 1 mile
1lb = 16 ounces
1kg = 2.2 lbs
1 ton = 2000 lbs
1 meter = 40 inches. its 39.xx but 40 works.
1 cup = 8 fluid ounces = 1/2 pint = 1/4 quart = 1/16 gallon
F = 9/5C + 32
i think this should b enough. Anyone wanna add something else?
1 inch = 2.54 cm
5280 ft in 1 mile.
1760 yards = 1 mile
1lb = 16 ounces
1kg = 2.2 lbs
1 ton = 2000 lbs
1 meter = 40 inches. its 39.xx but 40 works.
1 cup = 8 fluid ounces = 1/2 pint = 1/4 quart = 1/16 gallon
F = 9/5C + 32
i think this should b enough. Anyone wanna add something else?
3 feet = 1 yard
1 inch = 2.54 cm
5280 ft in 1 mile.
1760 yards = 1 mile
1lb = 16 ounces
1kg = 2.2 lbs
1 ton = 2000 lbs
1 meter = 40 inches. its 39.xx but 40 works.
1 cup = 8 fluid ounces = 1/2 pint = 1/4 quart = 1/16 gallon
F = 9/5C + 32
i think this should b enough. Anyone wanna add something else?
That looks great - those are probably the highest yield conversions. Anything past that and you're probably just wasting your time.
On a random QR side note, make sure you know the equation for ellipses. I got one question on ellipses and I was glad I watched a Khan Academy video about them.