possibly Pat mistakes??

[tRNA]

---

Members do not see this ad.

Hey guys I have some pat questions which I think are mistakes, its just abnormal that I found so many, either my pat IQ is really low or they need to rethink these answerrs, if you could help me out that would be great, thanks

http://i256.photobucket.com/albums/hh198/trna/5t2.jpg
5) Ansr is B but what's wrong with C?

http://i256.photobucket.com/albums/hh198/trna/8t2.jpg
8)Ansr is C but I just don't see how it could be? I mean which view is that, top, bottom, right,…??

http://i256.photobucket.com/albums/hh198/trna/18t2.jpg
18)Ansr is C but if this is the case then what's the significance of the solid and dotted diagonal lines on the top view(on the squares), I don't see their effects on the end view

http://i256.photobucket.com/albums/hh198/trna/20t2.jpg
20)Ansr is B but shouldn't the circle in the top rectangle be solid since it should be visible from the end view?

http://i256.photobucket.com/albums/hh198/trna/30t2.jpg
30)Ansr is D but shouldn't it be A?

 

[CannonD]

i think the answer is B, and can't be C because you can see the rod stick out from the surface on the left hand side and and the base of the shape is smaller than the top. whereas in figure B the thickness on top is thinner compare to bottom and the orientation of the rod stick up is the same. Well that's what i think.

 

[that guy]

Hey guys I have some pat questions which I think are mistakes, its just abnormal that I found so many, either my pat IQ is really low or they need to rethink these answerrs, if you could help me out that would be great, thanks

http://i256.photobucket.com/albums/hh198/trna/8t2.jpg
8)Ansr is C but I just don't see how it could be? I mean which view is that, top, bottom, right,…??

first you can eliminate B and D because of the lengths..
if you turn the object around so the point is at the top, you can see that right edge, as in C is "flat" and the 2 projections on the left are parallel to the side (look where the 2 lines from the tip meet in the middle of the figure). finally, if you look at C and E, E can be eliminated because of the 2 points created by the slightly turned en\try into the keyhole. phew!

http://i256.photobucket.com/albums/hh198/trna/18t2.jpg
18)Ansr is C but if this is the case then what's the significance of the solid and dotted diagonal lines on the top view(on the squares), I don't see their effects on the end view

for this I looked at the very top portion of the front view and saw that it was flattened at the top (from experience I know that the diagonal on the top view for that piece indicates the side view will be the same). dont be fooled by the diagonals to thiking they are triangles...

http://i256.photobucket.com/albums/hh198/trna/20t2.jpg
20)Ansr is B but shouldn't the circle in the top rectangle be solid since it should be visible from the end view?

B would be correct if the top circle was solid. but i suppose it is the best of the 4 answers...

http://i256.photobucket.com/albums/hh198/trna/30t2.jpg
30)Ansr is D but shouldn't it be A?

i agree.. D isnt even the proper width to even be considered.

where did you get these? I would discard the source as a viable study guide.

 

[doc toothache]

Hey guys I have some pat questions which I think are mistakes, its just abnormal that I found so many, either my pat IQ is really low or they need to rethink these answerrs, if you could help me out that would be great, thanks

http://i256.photobucket.com/albums/hh198/trna/5t2.jpg
5) Ansr is B but what's wrong with C?

http://i256.photobucket.com/albums/hh198/trna/8t2.jpg
8)Ansr is C but I just don't see how it could be? I mean which view is that, top, bottom, right,…??

http://i256.photobucket.com/albums/hh198/trna/18t2.jpg
18)Ansr is C but if this is the case then what's the significance of the solid and dotted diagonal lines on the top view(on the squares), I don't see their effects on the end view

http://i256.photobucket.com/albums/hh198/trna/20t2.jpg
20)Ansr is B but shouldn't the circle in the top rectangle be solid since it should be visible from the end view?

http://i256.photobucket.com/albums/hh198/trna/30t2.jpg
30)Ansr is D but shouldn't it be A?

For 5. In C the dowel is too far to the left side.
For 18. the bottom cube is cut diagonally and a triangular portion is removed from the bottom portion; the middle cube is cut diagonally and a triangular portion is removed from the top portion.

 

[tRNA]

thank you guys, I really appreciate it, everything makes sense except 8) i have to look at it some more later,
I can't say the study guide, moderators might close the thread, pm me if you wanna know

 

[doc toothache]

Hey guys I have some pat questions which I think are mistakes, its just abnormal that I found so many, either my pat IQ is really low or they need to rethink these answerrs, if you could help me out that would be great, thanks

http://i256.photobucket.com/albums/hh198/trna/5t2.jpg
5) Ansr is B but what's wrong with C?

http://i256.photobucket.com/albums/hh198/trna/8t2.jpg
8)Ansr is C but I just don't see how it could be? I mean which view is that, top, bottom, right,…??

http://i256.photobucket.com/albums/hh198/trna/18t2.jpg
18)Ansr is C but if this is the case then what's the significance of the solid and dotted diagonal lines on the top view(on the squares), I don't see their effects on the end view

http://i256.photobucket.com/albums/hh198/trna/20t2.jpg
20)Ansr is B but shouldn't the circle in the top rectangle be solid since it should be visible from the end view?

http://i256.photobucket.com/albums/hh198/trna/30t2.jpg
30)Ansr is D but shouldn't it be A?

In case you are still unclear for 30, for A to be correct the top and front views would have to be the mirror images.

For 20, the circle should be solid.

 

[tRNA]

thanks, I found some more questions, instead of starting new thread i'll just post here, sorry pat is really not my thing
thanks again for the help


http://i256.photobucket.com/albums/hh198/trna/83t2.jpg
83)Ansr is D I did cut out this shape, but it just doesn't fold up that way, that huge space between the two triangles is nonexistent??


http://i256.photobucket.com/albums/hh198/trna/10t1.jpg
10)Don't have the ansr for this one but I have narrowed it down to B or C but can't eliminate one, both seem to be correct, any ideas?

http://i256.photobucket.com/albums/hh198/trna/84t1.jpg
84)Ansr is D but shouldn't it be B, that shape on the bottom of the arrow is clearly wide enough to make a square, not a rectangle, do you agree?


http://i256.photobucket.com/albums/hh198/trna/28p2.jpg
28)Ansr is A but how can you eliminate D in the explanations they also show A and D having the exact same front and top view

 

[that guy]

83. wouldnt it be B??
10. is B, the pyramid ends with the block off the bottom so it cant be C
84. it is D because the right most piece is rectangular so this cancels out B which has a square
28. if you look at the front view, the center area has the square divided by a horizontal line... therefore it would have to show a horizontal dotted line on D. also the the dotted vertical line in D goes all the way to the top which would have a horizontal line in the top-middle of the front view to close off the square.... that was a terrible explaination for 28 but keep looking at it and you can see that D is not possible

 

[tRNA]

thanks, for83 ,I thought it would be b too, but when i cut it out even b doesn't work, so must be mistake