I have some beefy patients whom I do shoulder glenohumeral joint injections under fluoro. Used thepainsource site as a guide on where to put the needle but wondering if other people have tips on optimal placement of shoulder joint since my contrast flow is so so.
-
CycleTrack and SDN are teaming up to make medical school admissions more transparent and accessible! Read the announcement to learn how we’re supporting the future of CycleTrack’s free application-tracking tools .
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Shoulder injection under fluoro tips?
Started by CarabinerSD
Get help with your application
Use all the free resources available to you from SDN: articles, guides, expert advising, forums discussions, and school research.
The best thing to do is position them with their palm facing upward. I draw a line with the AC joint intersecting with the coracoid process and that's my target site usually gets the job done. Otherwise you can go to the superior medial border of the humeral head. Also, I find it best if you're not coaxial with this injection.
I find prone is a lot better. Less painful, no tendons, less pressure during injection, more likely dye looks good on the first try
Prone, arm at side.
Straight down to upper outer humeral head about 1 cm inward from edge of bone. 25g 3.5" needle.
Have never done it without fluoroscopy. I suspect you cannot be IA without image guidance based on contrast patterns once I hit os.
Straight down to upper outer humeral head about 1 cm inward from edge of bone. 25g 3.5" needle.
Have never done it without fluoroscopy. I suspect you cannot be IA without image guidance based on contrast patterns once I hit os.
Never done shoulder injections without fluoro?Prone, arm at side.
Straight down to upper outer humeral head about 1 cm inward from edge of bone. 25g 3.5" needle.
Have never done it without fluoroscopy. I suspect you cannot be IA without image guidance based on contrast patterns once I hit os.
SAB yes, IA- nope.Never done shoulder injections without fluoro?
AC: doesn't last. Not reason to do it (except pre-game for state championships).
I know it's not what you asked, but doing them under US, posterior approach is stupid easy. Probe under blade of scapula, in plane approach, drop into the valley that shows up on imaging and inject. I do the picture a+b approach below. 25g needle works fine. Pajunk shows up better on US if you have it but not necessary.
oh, FFS.I know it's not what you asked, but doing them under US, posterior approach is stupid easy. Probe under blade of scapula, in plane approach, drop into the valley that shows up on imaging and inject. I do the picture a+b approach below. 25g needle works fine. Pajunk shows up better on US if you have it but not necessary.
View attachment 404194
see that big round thing? aim for it. patient supine, i can do the shot with 2 steps on the pedal. no positioning, no goop, no looking at a snowstorm.
I wouldn't do upper outer. Branches of the anterior circumflex humeral artery exist there and are avoidable if you use other approaches. Watching dye on fluoro probably prevents vascular injection, but why even take the risk?Prone, arm at side.
Straight down to upper outer humeral head about 1 cm inward from edge of bone. 25g 3.5" needle.
Have never done it without fluoroscopy. I suspect you cannot be IA without image guidance based on contrast patterns once I hit os.
Superior-medial is better, and more traditionally described as the fluoroscopy approach:
Fluoroscopic Guided Glenohumeral Joint Injection – Technique and Overview - The Procedure Guide
Technique for a glenohumeral shoulder joint injection procedure with sample fluoro images/videos, anatomy, tips, indications/contraindications, etc.
Also, I can't prove that it matters, but I get the sense that being superomedial also can sometimes provide you a whiff of evidence that a rotator cuff tear is present if there is upward flow of the 1cc of contrast.
Lol, you do you man. That said, I think the fact that I showed a picture makes you think that this is some big drawn out process. I don't have them lie down, the picture just shows where I put the probe and what the image looks like.oh, FFS.
see that big round thing? aim for it. patient supine, i can do the shot with 2 steps on the pedal. no positioning, no goop, no looking at a snowstorm.
Patient sits down. Shoulder prepped. Image acquired, needle in, inject. Whole thing takes at most a minute from picking up the probe to pulling out the needle.
That said this is all predicated on 1: having an US in the room ready to go and 2: knowing how to use it.
Seems pretty excessive to do IA under fluoro when you can do them blind in the office with excellent results. Same with knees.SAB yes, IA- nope.
AC: doesn't last. Not reason to do it (except pre-game for state championships).
And I have had AC's last well over a year but I do those under fluoro.
why deprive of yourself of $100 77002??Seems pretty excessive to do IA under fluoro when you can do them blind in the office with excellent results. Same with knees.
And I have had AC's last well over a year but I do those under fluoro.
You are not as good as you think you are. So says the literature.Seems pretty excessive to do IA under fluoro when you can do them blind in the office with excellent results. Same with knees.
And I have had AC's last well over a year but I do those under fluoro.
Best you can do on a knee is 87% using superolateral approach.
Shoulders are lower.
Yes studies suggest that imaging - fluoro and u/s - is more likely to be positive than blind injections. I'll try to post some studies tomorrow
I have some beefy patients whom I do shoulder glenohumeral joint injections under fluoro. Used thepainsource site as a guide on where to put the needle but wondering if other people have tips on optimal placement of shoulder joint since my contrast flow is so so.
The best fluoroscopy approach to the shoulders is under ultrasound.
I cannot see the joint on Xray because the probe blocks my viewThe best fluoroscopy approach to the shoulders is under ultrasound.
Try using your flouro in plane setting.I cannot see the joint on Xray because the probe blocks my view
If i put it in plane mode i cant get calls.Try using your flouro in plane setting.
these images are old and badI know it's not what you asked, but doing them under US, posterior approach is stupid easy. Probe under blade of scapula, in plane approach, drop into the valley that shows up on imaging and inject. I do the picture a+b approach below. 25g needle works fine. Pajunk shows up better on US if you have it but not necessary.
View attachment 404194
image A his probe and needle are in two different zip codes
image B shows needle going straight through labrum
image C OOP if that's any normal injection needle, 1.5 in he's looking at cross section about 1 inch proximal on the needle and this is def not the rotator interval
all that said, learn to do these under ULTRASOUND. fluoro you are almost always going straight through the labrum.
How do I get through the labrum if I am on the upper/lateral humeral head?these images are old and bad
image A his probe and needle are in two different zip codes
image B shows needle going straight through labrum
image C OOP if that's any normal injection needle, 1.5 in he's looking at cross section about 1 inch proximal on the needle and this is def not the rotator interval
all that said, learn to do these under ULTRASOUND. fluoro you are almost always going straight through the labrum.
How do I get through the labrum if I am on the upper/lateral humeral head?
The Map is not the Territory.
Most rads angle the C arm to get a slight grashey view then aim for the rotator interval, like in that AJR article.I wouldn't do upper outer. Branches of the anterior circumflex humeral artery exist there and are avoidable if you use other approaches. Watching dye on fluoro probably prevents vascular injection, but why even take the risk?
Superior-medial is better, and more traditionally described as the fluoroscopy approach:
![]()
Fluoroscopic Guided Glenohumeral Joint Injection – Technique and Overview - The Procedure Guide
Technique for a glenohumeral shoulder joint injection procedure with sample fluoro images/videos, anatomy, tips, indications/contraindications, etc.theprocedureguide.com
Also, I can't prove that it matters, but I get the sense that being superomedial also can sometimes provide you a whiff of evidence that a rotator cuff tear is present if there is upward flow of the 1cc of contrast.
Will agree with lobel: A lot of people “think they are in” but based on flow patterns, aren’t.
I'm too tired to understand that.The Map is not the Territory.
Are people still trying to go between the humeral head and the labrum?
Like guys who do not know hips and do the same?
Sorry I should say, Many photos posted online I see are going for the labrum.How do I get through the labrum if I am on the upper/lateral humeral head?
Also, it’s really hard to define what you are going through on fluoro. It’s not like the hip joint with a huge landing spot and a thick ligament to make your contrast pretty
Some of the popular procedure sites online show contrast that gets to the ghj by way of the biceps tendon. It’s really not a good modality for the joint
Yes thisYou are not as good as you think you are. So says the literature.
Best you can do on a knee is 87% using superolateral approach.
Shoulders are lower.
knee studies show as low as 50-60 percent in trained ortho and sports med hands