Skipping through TFE advice

[dentist050892]

---

Members don't see this ad.

TFE takes me by far the longest to do, so I was wondering has anyone marked all of the TFE questions, then came back to them at the end and have still scored above a 22? Also, how is the DAT questions set up? If I go through and mark every TFE question, when I am done, do I have to keep clicking to go back or at the end of the test is there a way I can go over all marked questions?

 

[Soleus715]

This is an online tutorial for how the testing setup is like at prometric:

https://www.prometric.com/ClientFiles/ada/DAT/index.htm

I haven't taken the DAT so I don't have the answers right now but if you go through it I think it should be of help.

 

[sskater]

If you leave them blank or mark them, when you reach the end, you can click either review marked problems or review incomplete.
If you click on the link Soleus715 posted, page 17 of 19 shows what I mean.
Good luck, for tips check my breakdown, I managed a 22.

 

[DAT2013]

I used to do this earlier on in my studying and would simply skip all the TFE problems. Don't waste your time marking them. Just simply skip them and during the overview, you can just review incomplete and it will start you from problem #16 or whatever earlier problem you left unanswered. Hope this helps🙂

 

[NMC2010]

I did this on the DAT. I skipped all the Keyholes and TFE both. Really speeds up time and gives you a confidence booster - nice to have questions 31-75 done (45 questions) with 35+ minutes to go.

I did them in this order: angles through cube counting, keyholes, pattern folding, TFE. So I skipped allllll over the place, still did well. Timing is key!

Edit: I didn't score above a 22... but I did get a 21, still pretty close 😛

 

[dentist050892]

Sounds great! Will definitely do that, thanks guys