ADC exam buddy group here!(pls come in and join)

[Doctormelbourne]

---

Members don't see this ad.

Just a reminder to the users that the following is considered Prohibited Content on SDN:

- links to or copyrighted material (ie, the Oxford Handbook of Dentistry is copyrighted; Plunder is a web site which allows users to post copyrighted materials for others to use. SDN does not endorse this practice)

- actual test questions/MCQs or answers

- links to sites which provide the same services SDN does

You may post books for sale or discuss testing strategies, resources, etc. here. Testing organizations do monitor these threads and it is obviously a very popular and valuable one. Please do not post prohibited material and force us to close the thread.

Hi

We all agree with you. We all should obey the rule and regulation of this forum if we want this thread to keep guiding and inspiring all those doctor who are in need.

Best of luck to all who are working hard to pass their exams.
Cheers
Dr. Melbourne

 

[dentist20072007]

dear all i just found out sadly the oldest and most useful post of ADC has already been deleted and can not be found any more!!!!😕🙁

hi to every one
i dont know how this form works
iam writting this 3rd time i guess
i want to join your group i have cleare oet and preparing for part 1
help me out
i can help with oet materials and degree assesment
thanx

 

[hope533]

many thanks doctormelbourne for the big help!
all the best,
hope

 

[drill]

Here are two questions for discussion.

I am not sure about the answer. Please guys have a look.

1. Porcelain bounded to metal is strongest when it is :

A . Slowely fired
B . Under tension.
C . Fired several times
D . Under compression .

2. A major difference between light cured and chemical cured composite is that during setting or in function the light cured materials tend to:

A. Seal the margins better and completely
B. Exhibit less wear on time
C. Undergo greater colour change
D. Shrink more rapidly
E. Posses greater fracture toughness

 

[Doctormelbourne]

Here are two questions for discussion.

I am not sure about the answer. Please guys have a look.

1. Porcelain bounded to metal is strongest when it is :

A . Slowely fired
B . Under tension.
C . Fired several times
D . Under compression .

2. A major difference between light cured and chemical cured composite is that during setting or in function the light cured materials tend to:

A. Seal the margins better and completely
B. Exhibit less wear on time
C. Undergo greater colour change
D. Shrink more rapidly
E. Posses greater fracture toughness

Hi

Answer to the 1st question is definetly "D" . This MCQ is present in 'Boucher'. The rest of all options weaken the PFM (Porcelain Fused to Metal)

Answer to the 2nd question is also "D". I am not 100% sure about this one.
Cheers
Dr. Melbourne

 

[drill]

thank you drmelbourne

I agree with you! my choice would be same 😀

 

[drill]

The most common cause of porosity in porcelain jacket crowns is,

A. Moisture contamination
B. Excessive firing temperature
C. Failure to anneal the platinum matrix
D. Excessive condensation of the porcelain
E. Inadequate condensation of the porcelain

I thought the answer should be B

my argument is from a porcelain manual

"Do not insert the porcelain at a temperature that is too high. The immediate
vitrification of the surface layers will inhibit the emission of air, leaving porosity that will cause color variations and structural weaknesses in the restoration."

 

[Dandan]

hi guys
i have a question ,is there any body know how much the experience (Evidence of employment experience as a dentist following graduation to the present)is importent for assesmment by dental council ?
thanx
Dandan

 

[Doctormelbourne]

The most common cause of porosity in porcelain jacket crowns is,

A. Moisture contamination
B. Excessive firing temperature
C. Failure to anneal the platinum matrix
D. Excessive condensation of the porcelain
E. Inadequate condensation of the porcelain

I thought the answer should be B

my argument is from a porcelain manual

"Do not insert the porcelain at a temperature that is too high. The immediate
vitrification of the surface layers will inhibit the emission of air, leaving porosity that will cause color variations and structural weaknesses in the restoration."

HI DRILL.
THE ANSWER IS DEFINETLY "E" this mcq is also present in Boucher.
Cheers
Dr. Melbourne

 

[drill]

HI DRILL.
THE ANSWER IS DEFINETLY "E" this mcq is also present in Boucher.
Cheers
Dr. Melbourne

hi dr melbourne thank you , do you have any reference or explanation about this Q👍

 

[drill]

hi guys
i have a question ,is there any body know how much the experience (Evidence of employment experience as a dentist following graduation to the present)is importent for assesmment by dental council ?
thanx
Dandan

hi dandan , qualification is more important than working experience.
cheers
drill

 

[JAUJA]

hi you all, i have some doubts, can anyone help me please?

739.The MOST effective manner to produce a hard surface on a cast is by:
A. Employ as much water as possible on mixing
B. Employ as little water as possible on mixing
C. Adding 2% of borax to the mix
D. Adding calcium tetraborate
E. None of the above

741.Fusion temperature of impression compound should occur:
A. Below mouth temperature
B. Above mouth temperature
F. As of the skin temperature
G. At the room temperature
H. None of the above

742.The flow of the following percentage is allowable for impression compound (type I) at the oral temp of 37º
I. 6%
J. 10%
K. 2%
L. 20%
M. None of the above

thnks very much and good luck to everyone in the exam!😀

 

[sonpari]

Thank you sonpari.Can I send it to you or to drill?.I don't know how to send it?Plz give me a suggestion.plz let me know.I shall send that to the emails or upload that file in Communities.

hi enlighten07
that was quick; though i saw it today
appreciate ur effort and quick response

cheers

 

[drill]

Which of the following is true regarding preparation of custom tray for elastomeric impression:

A. Adhesive is preferred over perforation
B. Perforation provides adequate retention
C. Adhesive is applied immediately before procedure
D.Perforations are not made in the area over the prepared tooth

could someone give an explanation . ?

 

[DrHelos]

A major difference between light cured and chemical cured
composite is that* *during setting or in function the light cured materials
tend to:*
A. Seal the margins better and completely
B. Exhibit less wear on time
C. Undergo greater colour change
D. Shrink more rapidly
E. Posses greater fracture toughness



could u please answer to this question? thank u in advance

 

[PSK]

A major difference between light cured and chemical cured
composite is that* *during setting or in function the light cured materials
tend to:*
A. Seal the margins better and completely
B. Exhibit less wear on time
C. Undergo greater colour change
D. Shrink more rapidly
E. Posses greater fracture toughness



could u please answer to this question? thank u in advance

the answer is A, because,the setting reaction for light cured composite is towards the light source,ie, from the centre to the periphery.whereas in selfcured composite the setting mechanism is from the periphery to the centre(shrinkage). so light cured composite seal the margins better and completely.



Cheers.🙂

 

[PSK]

Which of the following is true regarding preparation of custom tray for elastomeric impression:

A. Adhesive is preferred over perforation
B. Perforation provides adequate retention
C. Adhesive is applied immediately before procedure
D.Perforations are not made in the area over the prepared tooth

could someone give an explanation . ?

I think the ans is D, because, if perforation is made in the area over the prepared tooth the margins of the preparation cannot be recorded properly since when pressure is applied excess material will flow out of the perforation and enough material will not be there to record the margins(especially subgingival)
for other options-ideal custom made tray uses both perforation and adhesive and adhesive has to be dried before taking impression.

does my explanation makes sense???kindly suggest..

cheers🙂

 

[dev mistry]

hi apexo

i have mailed u already
hope u got it

cheers

hi sonpari.i m indian n leaving in melbourne.can you mail me 1000 mcq as i m going to appear in sep2008.pls help me.thank you

 

[DrHelos]

the answer is A, because,the setting reaction for light cured composite is towards the light source,ie, from the centre to the periphery.whereas in selfcured composite the setting mechanism is from the periphery to the centre(shrinkage). so light cured composite seal the margins better and completely.



Cheers.🙂

thank u so much for ur reply and explanation

 

[Arsalan1358]

ID :Arsalan1358
status :I am in 3rd year of BDS( end of 3rd year) and after 1 year i will finish my BDS then i will participate in exam immidietly😀
location ：India
country of origin ：Iran
area can help with or need help：I checked the ADC web site but no reference is there. I will be very greatful and thankful if you share your Studying materials and experince with me.😎
year of degree ：After 1 year😀
time in Oz ：
email : [email protected]

 

[Arsalan1358]

Hi every body spcially Dear DRILLLLLLLL
I want the studying materials for the ADC exam! If you have them as a soft copy in any format just please email it to: [email protected]
I will be very thankful.
Another thing! I read the pots ( Not all the posts and Not completely😀)and i saw every body is talking about a common e-mail for those people post here and they share and keep all of their materials there! If it is true please give that e-mail's Address and Password! If not, Just help to collect the materials for studying!
Anyway! We are there students and classmats which decided to go to Australia! Just We need the materials that nowhere we found them! Please if you have ( ANYBODY) e-mail it!😉🙂
THANKS EVERYBODY.

 

[Canine3112]

I applied for the OTC and I was told there will be a skills assessment.

Does anyone have an idea of what the assessment is all about, what the general structure of the assessment is like or any useful info

 

[Arsalan1358]

Hi Canine....
I herad about OET but it is the 1st time that i hear about OTC! What is that?😀 I don't have any idea but i think atleast you know something

 

[Wings]

hey guys im appealing to anyone who may have the 1060 mcqs, bouchers and/or cawsons on soft copy or links to the same to pls mail me on this email add [email protected].

acquiring them from d supply 😡 proved futile and iv run out of patience but mostly out of time.

i shall b very grateful.

to all who r taking the prelims in March '08... break a leg (not literally) and c u on the other side

cheers

 

[dev mistry]

thanks for sharing your experience on assessment sonpari.
could you open that file you download from allislam , i couldn't 😳

but i have decks and will upload into our account slowly coz the file is big and it takes time

cheers drill

hi drill can you pls send me the dental decks as i m preparing for preliminary exams in sept2008

 

[dev mistry]

hi nasa1 can you send me the dental supply material to my email id. its [email protected] you

 

[dev mistry]

very good
it is there!thank you sonpari~
thinking if I should return the book to the bookstore🙄

IDev mistry
STATUSentist
LOCATION:INDIA
COUNTRY OF ORIGIN:INDIA
AREA CAN HELP WITH OR NEED HELP😛assed oet listening n speaking.need cawson,1000mcq n dental decks for preliminary
YEAR OF DEGREE:2007
EMAIL[email protected]

 

[StellaW]

Hi,
I am new and am interested in the MCQs, is there anybody who can supply any of it, thanks.

 

[drill]

sorry to new comers , too busy to help at the moment , will try to help after my March exam

cheers drill

 

[drill]

I think the ans is D, because, if perforation is made in the area over the prepared tooth the margins of the preparation cannot be recorded properly since when pressure is applied excess material will flow out of the perforation and enough material will not be there to record the margins(especially subgingival)
for other options-ideal custom made tray uses both perforation and adhesive and adhesive has to be dried before taking impression.

does my explanation makes sense???kindly suggest..

cheers🙂

thanks PSK for your answer , from some others opinion it seems that B is a correct choice. for choice D,even if material goes through the poforation, there will still be enough materials for margin details. ...

cheers, drill 👍

 

[Doctormelbourne]

Which of the following is true regarding preparation of custom tray for elastomeric impression:

A. Adhesive is preferred over perforation
B. Perforation provides adequate retention
C. Adhesive is applied immediately before procedure
D.Perforations are not made in the area over the prepared tooth

could someone give an explanation . ?

Hi

The answer is "B". because even without applying adhesive, perforation only is even enough to provide retention to the impression material, although adhesive gives some extra retention.
A. Adhesive is not prefferred over perforation, opposite is true.
C. Adhesive is applied a little bit earlier before procedure so that it apparently becomes dry.
D. Perforation are made also in the area of prepared tooth/teeth as the material thickness is very less there so it even needs more retention.

Cheers
Dr. Mlbourne

 

[Doctormelbourne]

hi nasa1 can you send me the dental supply material to my email id. its [email protected] you

Hi new member!
nasa1's dental supply material is not something that you will get in your e-mail in free. You have to pay by credit card.
Cheers
Dr. Melbourne

 

[Canine3112]

I asked about the assessment for admission into the OTC programme. Do you have an idea what the assessment involve

 

[Canine3112]

Hi Canine....
I herad about OET but it is the 1st time that i hear about OTC! What is that?😀 I don't have any idea but i think atleast you know something

almost everyone know about the course offered at royal melborne hsopital to overseas trained dentists.

go to the website its in one of the posts in this forum

 

[Arsalan1358]

Hi everybody
I think all of us want to immigrate to Australia and b'coz of this you made this forum to exchange your materials and share your information about Immigration and what is neccessary for that like ADC exam and .....
I have a big Problem and i think you can help me. My problem is:
1) Is it neccessary to have 2 years of experience to be eligible to migrate to Australia and participate in the ADC exam? we should obtain IELTS 7?( B'coz few day's ago i sent an e-mail to one of the immigration agancies and i asked how can i migrate to australia and am i eligible to migrate and i answered all of their questions in detail but they told me at the end i should obtain IELTS 7 and should have 2 years of experince😱😱. As i explained in my Introduction i am at the end of my3rd year of BDS and after 1 year i will finish my course and get my degree and after that i have 1year of internship and immidietly after internship i want to go australia. Now for me after they told me i need 2 years of xperience and need IELTS7 everything have been twisted. Somebody guide me.) Reaaly i should have 2 years of experience and IELTS 7?😡🙁

Thanks Everybody.👍

 

[Wings]

Hi everybody
I think all of us want to immigrate to Australia and b'coz of this you made this forum to exchange your materials and share your information about Immigration and what is neccessary for that like ADC exam and .....
I have a big Problem and i think you can help me. My problem is:
1) Is it neccessary to have 2 years of experience to be eligible to migrate to Australia and participate in the ADC exam? we should obtain IELTS 7?( B'coz few day's ago i sent an e-mail to one of the immigration agancies and i asked how can i migrate to australia and am i eligible to migrate and i answered all of their questions in detail but they told me at the end i should obtain IELTS 7 and should have 2 years of experince😱😱. As i explained in my Introduction i am at the end of my3rd year of BDS and after 1 year i will finish my course and get my degree and after that i have 1year of internship and immidietly after internship i want to go australia. Now for me after they told me i need 2 years of xperience and need IELTS7 everything have been twisted. Somebody guide me.) Reaaly i should have 2 years of experience and IELTS 7?😡🙁

Thanks Everybody.👍

hi Arsalan

what i know thru my experience while applying is that the 2 years work experience is mandatory. secondly IELTS 7 or 6 or 5 for that matter doesnt count. OET is the recognised english language exams for adc exams. your enthusiasm 2 do the exams is commendable. however il advise u that alot of patience is required for the entire process of applying and taking the exams. i stand to b corrected on any of these facts if anybody wishes to do so.

otherwise all the best

 

[Arsalan1358]

Thanks dear WINGS for the information😎
When you want to give your exam? When is your exam?
Do you have the Softcopy of all the studying material like 1060 MCqs? If yes can you e-mail them to my e-mail address:[email protected]
I shall be very greatful.
Thanks 👍👍🙂

 

[Cacaums]

hi Arsalan

what i know thru my experience while applying is that the 2 years work experience is mandatory.

Hello Wings
What do you mean 2 years work experience? Is it for the ADC assessment or for getting the ADA licence at the end of all the process ?
As far as I know, for the ADC assesment 2 years work experience is not mandatory.
Cheers
Cacau

 

[navprax]

hi
hope u all are in high spirits. drill and Sonpari and others wat abt your prepn.. my best wishes are always with you may god bless u all and u shuld come out with flying colours.
all the best who are appearing for march prelims 08
👍👍👍👍👍👍
🙂🙂

 

[Arsalan1358]

Hi dear ccaums
I asked about the ADC exam and immigration to australia and wings have answered my question about ADC exam and now you are telling it is not neccessary! Really i don't have any idea about that but few days ago from a immigration agancy they told me i need years of experience!
Wings explained through his experince and now is your turn cacaums! can you explain did you apply for ADC exam? If yes then did they ask you about 2years of experience or not.
Thanks.

 

[sonpari]

Hi

The answer is "B". because even without applying adhesive, perforation only is even enough to provide retention to the impression material, although adhesive gives some extra retention.
A. Adhesive is not prefferred over perforation, opposite is true.
C. Adhesive is applied a little bit earlier before procedure so that it apparently becomes dry.
D. Perforation are made also in the area of prepared tooth/teeth as the material thickness is very less there so it even needs more retention.

Cheers
Dr. Mlbourne

hi dr melbourne check this
ADHESIVES AND PERFORATIONS
It is essential that impression materials adhere firmly to the impression trays. This can be achieved by either perforations or by the use of adhesives. Adhesive solutions are needed for alginates, polysulphides and silicones. Adhesives for alginates are solutions of resins in alcohol, they are supplied in a bottle with a brush or an aerosol spray. Polysulphide adhesives are rubber solutions in acetone. Examples of silicone adhesives are isopropylalcohol or amylacetone.

some website i forgot

 

[sonpari]

hi dev and rest
like drill said we are too busy to help after exams u can shoot ur questions and will try to help ya
buzz us bak
cheers

 

[sonpari]

hi
hope u all are in high spirits. drill and Sonpari and others wat abt your prepn.. my best wishes are always with you may god bless u all and u shuld come out with flying colours.
all the best who are appearing for march prelims 08
👍👍👍👍👍👍
🙂🙂

tnx nav reali need all ur wishes
cya later
cheers

 

[rhymeNrain]

ID : rhymeNrain
status : will sit for OET in June 2008
location :
country of origin ：Bangladesh
area can help with or need help：Need help to get OET Sample material, guideline & of course courage. Help pls..
year of degree ：2003
time in Oz ：
email : [email protected]

 

[alldent]

Hi dear ccaums
I asked about the ADC exam and immigration to australia and wings have answered my question about ADC exam and now you are telling it is not neccessary! Really i don't have any idea about that but few days ago from a immigration agancy they told me i need years of experience!
Wings explained through his experince and now is your turn cacaums! can you explain did you apply for ADC exam? If yes then did they ask you about 2years of experience or not.
Thanks.

hi
there r 2 aspects 2 ur qustion immigration? and adc?
now for adc examz u need no experience,how soever it will approx take 1.5-2 years after u complete ur degree to clear the tests,even if u clear em all in one go.
now after u clear them u can apply for work visa or immigration..
immigration here ia based on point system..and points for ur age, qualifications and all that stuff have points..and u need 120 points to get immigration..and the points keep changin almost every year..so now u really cant plan that ahead..

 

[Arsalan1358]

Thanks dear Aldent for those valuable information which you gave me!
I have one more question:
Do you any official and reliable web site which has those points for Age, Qalification,....? If yes just please post it here! I want to check how many points i will have when i finish my course😀👍

And Thanks AGAIN Dear!

 

[Doctormelbourne]

hi
there r 2 aspects 2 ur qustion immigration? and adc?
now for adc examz u need no experience,how soever it will approx take 1.5-2 years after u complete ur degree to clear the tests,even if u clear em all in one go.
now after u clear them u can apply for work visa or immigration..
immigration here ia based on point system..and points for ur age, qualifications and all that stuff have points..and u need 120 points to get immigration..and the points keep changin almost every year..so now u really cant plan that ahead..

Hi
i think officail web sites are avaible for each and every thing. Thay have got so much information. You just have to do a little bit research and devote some timeto find out your required information. You can always send them e-mails or call them personally to enquire about every thing.
cheers
Dr. melbourne

 

[fqs]

hi guys i am writing in particular to drill and dr.melbourne;
someone had forwarded 1060 mcqs...if u could please have a look at it and tell me if it is good enough to forward it to the other needy people it would be nice...do tell me where to send it
thanks
bye

 

[Arsalan1358]

Hi dear Fqs
I was searching for those 1060 MCQs for a lng time ( Means around 1 week 😀)! Can you send them to my e-mail: [email protected] ?

Thanks dear🙂😉👍

 

[briver]

Dear Arsalan1358,
just google search "australian immigration" and u will get all the info u need. Also check out the ADC & OET website. u can google those as well if u dont know the sites.
Goodluck.